Marine Band Deluxe Harmonica Comb (Test Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement comb based on my Marine Band Deluxe's stock pearwood comb measurements.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
This is a replacement comb for the Hohner Marine Band Deluxe harmonica, modeled from precise measurements taken off the stock pearwood comb.
Note: this is untested. I haven't confirmed fit or seal quality against a real Marine Band Deluxe yet — print at your own risk and check dimensions before committing to a full run. Feedback and fit reports are welcome.
This comb is explicitly based on MBD measurements, but the dimensions suggest it may also fit a classic Marine Band converted to screws (in place of the original nailed construction). This compatibility is not confirmed — if you try it on a converted MB, please report back on fit.
Printing notes:
Layer height: 0.12mm
Perimeters: 4
Airtightness matters a lot for this part — the above settings worked well for airtight results on a previous comb print