1 / 1
Marine Band Deluxe Harmonica Comb (Test Fit) — image 1

Marine Band Deluxe Harmonica Comb (Test Fit)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement comb based on my Marine Band Deluxe's stock pearwood comb measurements.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
25
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Public Domain

This is a replacement comb for the Hohner Marine Band Deluxe harmonica, modeled from precise measurements taken off the stock pearwood comb.

Note: this is untested. I haven't confirmed fit or seal quality against a real Marine Band Deluxe yet — print at your own risk and check dimensions before committing to a full run. Feedback and fit reports are welcome.

This comb is explicitly based on MBD measurements, but the dimensions suggest it may also fit a classic Marine Band converted to screws (in place of the original nailed construction). This compatibility is not confirmed — if you try it on a converted MB, please report back on fit.

Printing notes:

  • Layer height: 0.12mm

  • Perimeters: 4

  • Airtightness matters a lot for this part — the above settings worked well for airtight results on a previous comb print