MX-5 ND IPod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dashboard dock for putting your ipod with integrated 30pin cable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Open Community License v1.1
I wanted a mount for my IPod 7G and didn't find anything suitable, so i made my own.
The design for the base is heavily inspired by the ilmotorsport/rspeed phone mount.
Print Settings
I printed in Prusament PC Blend Carbon Fibre with mostly the default 0.15mm Balanced profile. Prusa Slicer project file with all settings is included.
Print:
Perimeters: 3
External Perimeters First: true
Infill: 15% Gyroid
Support Style: Organic
Support Top Z Distance: 0.1
Filament:
Extrusion Multipler: 0.94
Assembly
Cradle
The ball mount is glued to the cradle with a screw serving as index.
Cable is slotted in and back holder pieces screwed into heatset inserts with M3x6 socket head screws
Ball Mount
The ball has a M3 heatset insert and is fixed to the Dash piece with a long M3x30 screw, smaller screw works too, this gives the whole ball a bit more support.
Dash
Currently just hooks in next to the display and i put two small pieces of double sided tape on the back. Need to see if i can make it slot in between the panels.