1 / 1
Behringer P16 Stand Mount — zdjęcie 1

Behringer P16 Stand Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stand mount for Behringer P16 and its variants. Currently for 25 mm stand diameter.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original model by Christian Diehm, yet greatly designed, seemed to me a bit too tight - I was not able to tight the screws to P16 when printed out of ASA.

Besides the print, you will need

  • 2 × M6 hex nuts (DIN 934)

  • 2 × M6 × 40 mm carriage bolts (DIN 603, could be one dimension shorter)

  • 3 x M4x12 mm

The M4 screws and M6 nuts need to be glued into the knobs. M6 knob needs to be printed with supports.

V2: Improved clamping mechanism - less screwing necessary, shorter M6 carriage bolts.

Tagi