1 / 1
Behringer P16 Stand Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand mount for Behringer P16 and its variants. Currently for 25 mm stand diameter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model by Christian Diehm, yet greatly designed, seemed to me a bit too tight - I was not able to tight the screws to P16 when printed out of ASA.
Besides the print, you will need
2 × M6 hex nuts (DIN 934)
2 × M6 × 40 mm carriage bolts (DIN 603, could be one dimension shorter)
3 x M4x12 mm
The M4 screws and M6 nuts need to be glued into the knobs. M6 knob needs to be printed with supports.
V2: Improved clamping mechanism - less screwing necessary, shorter M6 carriage bolts.