Resin Tank Holding Bracket for AquaSure Harmony Series 48,000 Grain Water Softener Resin Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resin Tank Brackets for an AquaSure Harmony Series 48k Grain Resin Tank Used SUNLU Black PETG @ 3 Walls, 30% Infill
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Created these brackets to increase the level of hold on the resin tank for this water softener, as even though I was sure my base was flat and sat well, I didn't want to take any chances.
Print 2 of each, I printed out of PETG with 3 walls at 30% infill for some bending leeway in fitting the two halves together. Mounts to a wall or other structure with two #8 Round Head Screws, and the two halves are held together by two #10 Round Head Screws with nut on the other side.
My application used 2 3" #8s for mounting, but realistically it all come down to what you're mounting it in.
For my two halves, I used 2" #10s but 1 1/2" will work just the same, with less thread showing on the other side.