1 / 1
Resin Tank Holding Bracket for AquaSure Harmony Series 48,000 Grain Water Softener Resin Tank — image 1

Resin Tank Holding Bracket for AquaSure Harmony Series 48,000 Grain Water Softener Resin Tank

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Resin Tank Brackets for an AquaSure Harmony Series 48k Grain Resin Tank Used SUNLU Black PETG @ 3 Walls, 30% Infill

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Created these brackets to increase the level of hold on the resin tank for this water softener, as even though I was sure my base was flat and sat well, I didn't want to take any chances. 

Print 2 of each, I printed out of PETG with 3 walls at 30% infill for some bending leeway in fitting the two halves together. Mounts to a wall or other structure with two #8 Round Head Screws, and the two halves are held together by two #10 Round Head Screws with nut on the other side.

My application used 2 3" #8s for mounting, but realistically it all come down to what you're mounting it in.

For my two halves, I used 2" #10s but 1 1/2" will work just the same, with less thread showing on the other side.

Tags