1 / 9
30th Anniversary Pokémon Pikachu Card Stand (no supports needed) — zdjęcie 1
1 / 9

30th Anniversary Pokémon Pikachu Card Stand (no supports needed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model of a cardholder in a Pikachu form with the iconic 30th Anniversary logo embedded into the cheeks

Ocena
0 / 5
Polubienia
5
Pobrania
22
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Since the official release of the new anniversary set is right around the corner, I decided to create a new version of my Pikachu stand with the number 30 embedded into the cheeks. Ideally this model is printed with a 0.08 layer height with a 0.4 nozzle (this gave me the best results), but it's also possible to print with a standard 0.2 layer height (see pictures). These stands are suitable for hard cases or top loaders. Graded slabs are also possible, but you might have to put a toploader behind the slab to keep it upright. 

Unfortunately, people are using my files to sell online (even though I added them with a non-commercial license). Therefore, I added the non-commercial logo on the inside of the card slot. It should not cause any issues with printing and is completely hidden when a card is put into the holder. 

With previous card stands I also got requests for commercial use. I cannot (and will not) give commercial rights to any of these stands so please refrain from asking. 

Tagi