Liczymy pasujące modele…
Here is my personal interpretation of the Star destroyer. I made this model to fit with my previous resurgent class star destroyer. Once finished this model is 53cm long. The model is designed in several parts to avoid to have support…
CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
Print the boat in vase mode, and the sail in regular mode. The sail is one layer thick at 0.2 mm. It is a little tricky to grasp off the print bed just because it is thin. Once you have a corner off the bed, it should come off easier.…
T-nut for 30x30 V-Slot aluminum extrusion like PRUSA MK3S (8 mm gap) compliant with M3 nut. I used them to install the Rubber Feet Support for Prusa MK3 by Volan on the PRUSA MK3S If you like it, plz post a make :) Print Settings Rafts:…
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
Remix of GearWalker 's excellent v-slot nozzle holders, but these are compatible with t-slot 3030 extrusions like those found on the Prusa MK3 and Prusa mini, as well as T-slot 2020 extrusions like those used in most Voron models.…
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
As the original hopper was to big to fit under the kitchen cabinet, I designed that one which is more inline with my daily consumption anyway ;)
Just a remix for a different range. Starts at 260 on bottom, and then decreases in 5 C intervals to 230.
Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…
I had a hard time removing removing SANWA-OBSF-30 without damaging the tabs by hand. So I modeled this tool to assist in extraction. Consists of a cylinder to press the tabs inward and a plunger to push the button out Should also work for…
Holder for round temperature/humidity sensor, suitable for mounting in AL profile 3030 (Prusa Mini). The holder has prepared guide rails for the grooves of the AL profile 3030, the hole in the holders is prepared for an M5 screw (it is…
This is a elevation scope magnifier for a 30mm scope. Magnifies the numbers on the elevation turret by 3x for easier reading. Assembly: Cut the credit card magnifier to fit the frame. Place magnification piece into frame and then press…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Over on Tindie there's this cool Nixie Clock kit that I like so much, I've purchased two of them (granted I killed the first one and couldn't fix it, but... moving on). After I assembled the kit I determined the sufficient, but plain…
Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…
Introduction> Conception and main scope> 30° inclination is the most optimal for my small desk at home. Keeping the laptop on a stand allows saving space horizontally and holds the laptop screen closer and more visible to the user.…
I wanted to mount my CR-30 on the wall to save some space in my lab. These simple brackets allow me to do that. I put a bit of rubber between the brackets and the printer to allow me to clamp it down and reduce vibrations. Print the…
Replacement plastic part from Rog Strix Fusion 300 headset Print with supports, 100% infill, brim 6mm, 4 perimeters.
The dish drainer can be found here: https://www.ikea.com/ca/en/p/rinnig-dish-drainer-double-sided-10387261/ Cheese-themed, you may use this in any scenario to provide a 30 ° slope to objects. Some ridges can match a rail system to provide…
A 30mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
3 to 30 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…
Replacement piece to plastic mounting plates above earphones.
šablona k narýsování linek, výška 30mm
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
This is the UMBs, a modular storage system. You can print the assemble boxes and the accessories but if you want you can customize-it the way you want it to. For the prints, i recommend 30% infill and 3 walls and 4 top/bottom. Support is…
Own a legend of automotive performance with this 3D printable STL model of the Porsche 911 Turbo (930). This classic German performance car model is perfect for automotive enthusiasts and fans of iconic 70s and 80s supercars, showcasing…
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
this is a model of a pentagon fidget . it collapses and twists and you can sell it !! it has 1.2 mm thick walls with gaps of 1mm. use / sell responsibly
This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…
designed this for the new show coming out. it is closer to the fo4 model than the on screen one, but there's not many differences. inner diameter is 3.5 inches at the tightest. Category: Props
Featured in “Wolfgang's Channel” channel: This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case. I am using a 200mm Noctua fan (Noctua NF-A20 PWM chromax.black.swap) that only…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
The included files are a mounting bracket for the Magcubic Projector HY300 PRO. All the models available did not work for me so i had to make my own. The features include Support free design Can print in 2 orientations (Flat and Standing)…
This is my Mark II X-303 Prometheus from the show Stargate. The model is improved version of my original model and this time comes with several features. It has one hangar bay open and in it, there is an F-302. It has retractable landing…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Buy the components : https://jeje-linge.fr/en/products/pipboy-3000-fallout Code : https://github.com/jejelinge/PIPBOY_3000 FEATURES TUTORIAL Rafts:No Supports: Yes Resolution: 0.2 Infill: 15% Filament brand: Sunlu and Eryone Filament…
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
material: nut, hose attachment -ASA, seal -Flex wall layers: 3 infill: 30%
Tested in PLA @ 0.2mm layer height. No supports. Print upright as is. Works without any processing but processing is needed if good sound is desired.
The V30 is designed to need a lot less breath to be super loud. The tone is more precise, cleaner, but still easy to print. Be carefull, this whistle is really loud at low air flow! Links to the Thingiverse files: V29:…
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
PLAb System We all love our friends at ThorLabs, but sometimes you just need a part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. A component of the growing PLAb Collection of 3D printable…
Is your backpack buckle just one bad day away from total collapse? Don’t wait for disaster to strike mid-hike. Print this repair buckle now and stash it in your survivor kit! Because nothing says “prepared” like fixing your gear on the…
Simple box for multimeter DT830
.308 Ammunition Case This is a 3D-printed case I designed to hold 20 rounds of .308 ammunition. The silhouettes are extruded up just past the halfway point of the round giving it a secure hold and a satisfying 'click' when pressing in a…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
This model is compatible with the lego system.
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A comprehensive collection of Cylindrical / Parallel Dowel Pins according to ISO 2338 , ranging in diameters from M0.8 up to M30 . Each size is available in a…
Ceiling and wall mount for the Fritz! 3000AX Repeater. The 3000AX Repeater is slightly brighter than the non-AX version. update 12.10.2023: added different sizes, for wall mount better use 15mm or 20mm variant.
Gehäuse für Wemos D1 mini oder andere ESP8266-Boards (Esp32, nodemcu ...) mit DHT22 / AM2302-Sensor. Case for Wemos D1 mini or other ESP8266 boards (Esp32, nodemcu ...) with DHT22/AM2302 Sensor. Print Settings Printer Brand: Creality…
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed! Version 1.2 has a longer front plate so that it won't jam in EQ mode! When I bought my Seestar S50, I had to buy this equipment ($70…
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Hey folks, inspired by the video on Wolfgang's channel I became aware of @pixelwave's design. At first I really liked it, but after I printed it out and was in the process of preparing the case, it occurred to me that I need to do…
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 4 Supports: yes
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
There are many similar brackets around for many different radios but none for the Icom IC-2730 , so I made one. I used cheap M4x8 socket head screw from a kit, they worked nicely but I feel that they are just a bit smaller than the holes…
Print all three parts. You might have to scale the nut by 1-2% / tweak print settings in order to get a good fit. I've been printing with 0.15mm layer height, but others will probably work.
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
Resurgent class Star Destroyer completely redesigned (around 250 hours of cad work) to be printed in several parts at scale 1:3000. Once finished the ship is 1 meter long. But why 1:3000 scale ? Because I had the crazy idea to print…
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
The design was slightly changed to avoid discontinuities in the print. and some material was reduced. Print instructions With 1mm nozzle you can print PLA with 130% velocity at 215°C
UPDATED real size and sliced parts Dimention is real scale. I printed. i will wrap with carbon fiber All measurements are prepared with the real model. You can combine ready for printing. Wing Cap Added !!! 0.2 - 0.32 mm layer height PLA…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
The Architect's Scalpel, Cast in Precision. This is not a car. This is the blueprint for a generation, cast in unyielding German steel. The BMW E30 immortalizes the disciplined, analog purity of a true driver's instrument. Every crisp…
Simple and compact case to protect your display
This model is compatible with the lego system.
https://paypal.me/radicalreel Added wall storage jigs --------------------------------------- This is a remix of my ratchet strap reel which lets you take of the crank. If you print more of these it can be usefull. Some users requested it…
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser, and F3D. Wall mounted. Suitable for 3D printer or laser cutter (mountings need to be 3d printed). Requires: 4x wall screws to mount, or 8 for an extra secure…
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
3030 and 3060 profile elements. Fix using M4 * 16 screws and M4 * 15 washers. Prints completely support free, no sacrificial layers. Use .4 nozzle with 3.5 walls or .6 nozzle with 2.5 walls (alternate extra wall). Preferred Materials for…
I have also included the STEP files for all 3 sizes. How I Designed This: The original STL was converted back to a solid model in Inventor. I sectioned the model. Then copied and moved the sections around as needed. Finally all sections…
This set includes three fast first‑layer quick‑test plates, each with five simple squares for rapid adhesion checks and Z‑offset tuning. Each plate is 0.2 mm thick , giving you clean single‑layer patches that print quickly and clearly…
This model is compatible with the lego system.
Buy the components : https://jeje-linge.fr/en/products/pipboy-3000-fallout or My partner makes it for you : https://www.cesam3d.be/products/pipboy-3000-mk4-fallout-4-officiel-jejelinge FEATURES TUTORIAL [EN,ES,DE,FR sub] For those who…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
There are threee options with different diameters. 12, 10 and 8mm.
Fun toy disk launcher I made as a fusion 360 project. It is fully 3d printable and uses a clamp system to launch a disk. Print settings -No supports -Brim for pin -15% infill -5 perimeters for the spring/squeezer! (helps for more power)…
This is a new design of the idea designed by Simped24. It is a bit beefier and I engraved the warming that Bosch eBicke Lock is engaged.
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
