1 / 2
Heavy MedusaHC Hotend — zdjęcie 1
1 / 2

Heavy MedusaHC Hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bearing based M6 Insert MedusaHC hotend with boning support and adapter mount.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This hotend has the following changes:
1. Boning support
2. M6 heat insert for the ptfe connector
3. The m3 inserts that had to be drilled out and are replaced with self lubricating bearings, (3x5x5) https://www.aliexpress.us/item/2255799937870733.html
4. Breakout adapter can be attached with boning set screw, this may be changed in future revisions if issues are found with multiuse mounting point. 

Breakout Board:  https://www.printables.com/model/1839565-medusahc-hotend-breakout-board 

The bearings can be pushed in from the front until flush. Push them in by placing an m3 screw in the bearing and squeezing them in with channel locks. You will damage the bearings if you do not use an m3 bolt as a insert during press. 

Tagi