Heavy MedusaHC Hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bearing based M6 Insert MedusaHC hotend with boning support and adapter mount.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This hotend has the following changes:
1. Boning support
2. M6 heat insert for the ptfe connector
3. The m3 inserts that had to be drilled out and are replaced with self lubricating bearings, (3x5x5) https://www.aliexpress.us/item/2255799937870733.html
4. Breakout adapter can be attached with boning set screw, this may be changed in future revisions if issues are found with multiuse mounting point.
Breakout Board: https://www.printables.com/model/1839565-medusahc-hotend-breakout-board
The bearings can be pushed in from the front until flush. Push them in by placing an m3 screw in the bearing and squeezing them in with channel locks. You will damage the bearings if you do not use an m3 bolt as a insert during press.
