Kalkhoff Fender Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Clip used for my Kalkhoff Endeavour 8 and more.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Both of my fender clips for my Endeavour 8 from kalkhoff (bike) are missing in action. I am pretty sure that that is not the only bike which has this U-shaped element in kombination with a clip to mount the tiny tubes to stabilize the bikes fender.
After rear was replaced with a ugly piece of glasfiber rubbish i found. I lost the the front clip as well.
This is the reason, i designed a new one.
Printing Details:
I used PETG.
30% of Cubic infill.
0.12mm Layer height
2 Wall loops
No Brim
2gr of PETG
Print time roughly 30min.
Mounting notes:
It is very tight fit.
I don't want to lose it anymore
Use pliers - me: water pump pliers to press it on