ESP32-S3-DevKitC-1 Rack Tray 19" Rack 2U
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack tray for 10x ESP32-S3-DevKitC-1 boards, organised for ESP32 clustering.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Rack tray for 10x ESP32-S3-DevKitC-1 boards, organised for ESP32 clustering. Personally used to run AI agents, but also fits nerdminer clusters, experimentation rigs, or general dev board wrangling.
Compartments are designed for easy access — quick to seat a board or pull one for reflashing/swapping.
Hardware required:
12× M3x5x4 heat-set inserts (Voron spec)
12× M3x6 countersunk screws
2 x M3 nut
2 x M3x12 Pan Head
Printing
Prints without supports. The included profile uses PETG.
Material: PETG or PCTG minimum; in an enclosed space, I highly suggest using ABS/ASA.
The photos show the model printed in ASA.
Step and fusion files included.
Support my work
Do you like my work?
A like or a comment means a lot and keeps me making more.
Post your make in the comments section and on other 3D printing social media sites.
Your support helps me keep designing, fund the filament and materials needed for prototyping, and share everything for free.
Consider buying me a coffee.
Check out my other designs too!