1 / 3
Magnetic Headphone Holder - For Sqaure, Steel PC Cases
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple headphones/headset holder that attaches to a PC case (i.e. NZXT H510) via two 20 mm countersunk magnets. What…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple headphones/headset holder that attaches to a PC case (i.e. NZXT H510) via two 20 mm countersunk magnets. What is pictured is a slighter older version that only uses one magnet.
Printed using the Creality CR-6 SE, using Amazon Basics PLA. I can't remember what settings I used exactly, but I think I used a layer height of 0.2 mm and I printed the part upside down with supports. There is no need to glue the magnets, they should pop right in.