Miniware soldering iron holder for TS101
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This platform raises the metal soldering iron stand to give some clearance from the ground
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this holder to raise the metal soldering iron holder for my TS101.
When I use it with the CNC Kitchen's heatset insert kit the iron is longer and gets too close to the desk so a height gap is needed.
There is 2 available widths a larger an a medium, the height is the same.
You can reuse the same screw and feet bumpers the metal stand comes with.
Print it with ABS or ASA. Probably the medium sized one can be printed with PETG, but its untested.
| |
|---|---|
Soldering iron holder I used | https://www.aliexpress.com/item/1005009842512214.html?spm=a2g0o.order_list.order_list_main.111.1ab0180298MPEh |
Screw | You can use the holders own screw or use a longer M3 screw like: M3x12 SHCS for a more secure bond. |