Threaded PTFE Connector Holder for Back-Mounted Top Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original requires a new self-tapping screw. This one reuses Qidi's own from the side spool holder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Threaded PTFE Connector Holder
GD.Design's original PTFE tube guide has a tiny pilot hole meant to be used with your own self-tapping screws.
But Qidi's PTFE tube connector for the spool holder already has this screw:
Why not use it? So, I made a remix with an exact thread to match the screw :)
Printing Tips
The screw's thread depth is only ~0.325 mm radially, so print accuracy matters. The best way is to print it upright with 0.12 mm layer height.
But that increases the print time a lot, so I used variable layer height to only use 0.12 mm for the thread section and 0.20 mm for the rest. I attached my project file so you can just use that.
Let me know if you have any questions or concerns, I'd be happy to help.