Threaded PTFE Connector Holder for Back-Mounted Top Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original requires a new self-tapping screw. This one reuses Qidi's own from the side spool holder.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Threaded PTFE Connector Holder
GD.Design's original PTFE tube guide has a tiny pilot hole meant to be used with your own self-tapping screws.
But Qidi's PTFE tube connector for the spool holder already has this screw:
Why not use it? So, I made a remix with an exact thread to match the screw :)
Printing Tips
The screw's thread depth is only ~0.325 mm radially, so print accuracy matters. The best way is to print it upright with 0.12 mm layer height.
But that increases the print time a lot, so I used variable layer height to only use 0.12 mm for the thread section and 0.20 mm for the rest. I attached my project file so you can just use that.
Let me know if you have any questions or concerns, I'd be happy to help.