1 / 7
E30 Dash Cluster Voltmeter (OLED) — zdjęcie 1
1 / 7

E30 Dash Cluster Voltmeter (OLED)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

E30 dash cluster voltmeter, utilising a 0.5" Oled voltmeter display from Aliexpress

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

My E30 has a blank where the "CHECK" light would normally be due to it not being required in my area at that time, Decided to fit a small OLED voltmeter i spotted on Aliexpress (image inc to show the exact voltmeter purchased) 

It fits using the original fastener and I've also created a small bezel to cover the edges of the o#Oled when in the hole.

Wiring is connected to pin 1 (GND) and pin 7 (+12V) 

I printed this with the front face down on the bed and with supports enabled, I've printed in ABS but ASA is likely better.

Tagi