Roomba 405 Dustbin Flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement dustbin flap for the Roomba 400 series combo vacuum.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Roomba Dustbin Flap
We have a Roomba 405 combo wash/vacuum robot with a tendency to vacuum up its own dustbin flap. I couldn't find one online, so I made my own. This may or may not work in other models - see the photos for the dustbin type and part placement, yours might be similar.
Works best if printed in PETG. It's had limited testing so far (just fitment in the dustbin), so please give feedback.
Recommended Print Settings
Print in PETG for flexibility - the original part flexed quite a bit and fits in the eyelets with pressure
Print on either large flat side, it's a flat symmetrical flap
0.3mm layer height
No brim or support