Roomba 405 Dustbin Flap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.16 – €0.20 net (excluding VAT)
For file: Roomba Dustbin Door.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A replacement dustbin flap for the Roomba 400 series combo vacuum.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Roomba Dustbin Flap
We have a Roomba 405 combo wash/vacuum robot with a tendency to vacuum up its own dustbin flap. I couldn't find one online, so I made my own. This may or may not work in other models - see the photos for the dustbin type and part placement, yours might be similar.
Works best if printed in PETG. It's had limited testing so far (just fitment in the dustbin), so please give feedback.
Recommended Print Settings
Print in PETG for flexibility - the original part flexed quite a bit and fits in the eyelets with pressure
Print on either large flat side, it's a flat symmetrical flap
0.3mm layer height
No brim or support