Settlers of Catan Seafarers + Extension Box Inlay Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlays for Settlers of Catan Seafarers + 5&6 Player Expansion
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatibility
This set of inlays is compatible with the recent box version of the game.
The box has a dimension of 29,5 x 29,5 x 70mm. Please check before printing, i made the same mistake :)
Also check out my inlays for the basegame with 5&6 Player extension!
Printing
I printed the inlay out of PLA.
Here are my settings:
Infill: Rectilinear
Infill density: 10%
Perimeters: 2
Layer hight: 0.2mm
Support: No
You need to Print the following parts:
Part | Amount |
|---|---|
hexagons-box | 1 |
extension-box | 1 |
coin-box | 1 |
player-box-large | 3 |
player-box-small | 7 |
Credits
I was heavily inspired by this Model: https://www.thingiverse.com/thing:4902693
The player-box models are used from this model.