1 / 2
Ø32mm windsurfing mast extension rings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension rings for windsurfing mast
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made these extension rings for my uncle who is a windsurfer.
I didn't truly understand what the rings were for, but I share them anyways.
The dimensions
Inner diameter: 32.6mm
Outer diameter: 41mm (to match the plastic part that covers the pin)
Thickness is 4.2mm
I did try inner diameter of 32.4mm, but it had too much friction.
Printed with max perimeters in Prusament PC Blend Pro Green to possibly withstand salt water and UV-rays as I don't have ASA.
I painted the seam diagonal to possibly make it stronger
Printed on P1S with hardened 0.4 nozzle.