Guitar Hanger / Gymnastic wall bars mount for guitar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric (OpenSCAD) guitar hanger you can mount on gymnastic wall bars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v3.0
I designed this model for my needs: hanging my guitars on wall bars (space is at a premium in my room).
I used OpenSCAD and OpenAI Astra to create it from hand-drawn sketches.
It's parametric, so you can define your params if needed. In this configuration, the horizontal bar diameter is 25mm, and the vertical bar is square with a 40 mm side.
It's easy to print: you can print everything without supports by rotating the L-shaped part on its back so that the sliding dovetail is on top. But the side under the sliding lock is load-bearing, so printing it as presented in my 3mf files is recommended: this way, the load will be placed along filament seams, instead of perpendicular (a much weaker arrangement). In recommended orientations, you'd want to enable a small support under the sliding lock.
I used 0.2mm PETG and 55% sparse infill. Everything else: default settings.
Disassemblability is useful only for printing and initial assembly, so feel free to glue it forever.
Good luck
