Guitar Hanger / Gymnastic wall bars mount for guitar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric (OpenSCAD) guitar hanger you can mount on gymnastic wall bars.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v3.0
I designed this model for my needs: hanging my guitars on wall bars (space is at a premium in my room).
I used OpenSCAD and OpenAI Astra to create it from hand-drawn sketches.
It's parametric, so you can define your params if needed. In this configuration, the horizontal bar diameter is 25mm, and the vertical bar is square with a 40 mm side.
It's easy to print: you can print everything without supports by rotating the L-shaped part on its back so that the sliding dovetail is on top. But the side under the sliding lock is load-bearing, so printing it as presented in my 3mf files is recommended: this way, the load will be placed along filament seams, instead of perpendicular (a much weaker arrangement). In recommended orientations, you'd want to enable a small support under the sliding lock.
I used 0.2mm PETG and 55% sparse infill. Everything else: default settings.
Disassemblability is useful only for printing and initial assembly, so feel free to glue it forever.
Good luck
