1 / 3
Electronic Clinical Thermometer Prop for Healthcare Simulation — zdjęcie 1
1 / 3

Electronic Clinical Thermometer Prop for Healthcare Simulation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable electronic thermometer prop for nursing education, patient assessment, and healthcare simulation.

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! 😊
https://buymeacoffee.com/aleksandrs

Here is a 3D-printable electronic clinical thermometer prop, designed for healthcare simulation, nursing education, and basic patient assessment training.

This model is useful when learners need to recognise, select, or use a thermometer during a scenario without using real clinical equipment.

It can be useful for:

  • nursing simulations;

  • vital-sign assessment training;

  • emergency medicine scenarios;

  • paediatric simulation;

  • general ward and outpatient scenarios;

  • equipment familiarisation;

  • OSCE and clinical skills stations;

  • low-cost simulation kits.

The thermometer is non-functional and intended as a visual and handling prop only. It can be especially useful in scenarios where temperature measurement is part of the expected assessment, but an actual reading is provided separately by the instructor or simulation system.

For example, the learner can “measure” the patient’s temperature with the prop, and the facilitator can then provide the simulated result verbally, on a monitor, or on a printed observation chart.

I also have modified thermometer model with "sliding door", so you can write your desired temperature aunder it to uncover it during simulation.

Important safety notice

This is not a real thermometer and does not measure temperature.

It is a non-functional 3D-printed simulation prop intended exclusively for healthcare education, demonstration, and training. It must not be used for clinical assessment, diagnosis, or patient care.

If you use this model in your simulation centre, nursing programme, or course, please send me a message or photo - I always enjoy seeing how my models are being used!

Tagi