1 / 5
3D Printable HEPA Air Purifier | 220mm Fan — zdjęcie 1
1 / 5

3D Printable HEPA Air Purifier | 220mm Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple 3D-printable HEPA air purifier using a 220mm fan, magnetic lid, and washable pre-filter mesh.

Ocena
0 / 5
Polubienia
17
Pobrania
36
Wydruki
0
Wyświetlenia
359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

3D Printable HEPA Air Purifier

This is a simple, effective, and easy-to-build air filtration system designed for anyone who wants to build their own home air purifier using 3D-printed parts and readily available components.

The design consists of three main 3D-printable parts:

  • Main Frame – Holds the cylindrical HEPA filter and supports the rest of the assembly.

  • Upper Lid – Mounts the 220 mm fan and provides the main airflow outlet. A dedicated opening is included for routing the fan power wire.

  • Large Mesh Pre-Filter – Helps prevent hair, large dust particles, debris, and other coarse contaminants from reaching the HEPA filter.

The upper lid attaches to the main frame using 8 × 10 mm × 2 mm neodymium magnets. Four magnets are installed in the lid and four corresponding magnets are installed in the main body. This creates a secure connection while allowing the lid to be quickly removed whenever the filter needs to be inspected or replaced.

Required Components

The 3D-printed parts are only the housing and pre-filter components. The following commercially available parts are required:

HEPA Filter

  • Cylindrical HEPA filter

  • Approximately 200 mm diameter

  • Approximately 300 mm height

  • The exact filter dimensions should be checked against the provided design before assembly.

Fan

  • 220 mm fan

  • Mounted directly to the upper lid

  • The lid includes an opening for routing the fan power cable.

Magnets

  • 8 × neodymium magnets

  • Diameter: 10 mm

  • Height/thickness: 2 mm

  • 4 magnets for the upper lid

  • 4 magnets for the main frame

Optional Activated Carbon Filter

An activated-carbon layer/filter can optionally be added to improve the system's ability to reduce odors and certain gaseous pollutants. It is not required for basic particle filtration.

How It Works

The system uses the fan to pull room air through the filtration assembly. The large mesh pre-filter captures coarse contaminants such as hair and larger dust/debris before the air reaches the main HEPA filter.

The HEPA filter then performs the primary fine-particle filtration.

Basic airflow path:

Room Air → Mesh Pre-Filter → HEPA Filter → Fan → Filtered Air

An optional activated-carbon layer can be incorporated to provide additional odor/gas adsorption.

Key Features

  • Fully 3D-printable housing

  • Simple three-part construction

  • Designed around an easily obtainable cylindrical HEPA filter

  • Compatible with a 220 mm fan

  • Magnetic tool-free upper-lid attachment

  • Uses standard 10 × 2 mm neodymium magnets

  • Large removable mesh pre-filter

  • Helps protect the HEPA filter from hair and coarse debris

  • Easy filter replacement

  • Optional activated-carbon filtration

  • Minimal parts and simple assembly

  • Suitable for DIY/home use

  • Designed to be accessible for makers and 3D-printing enthusiasts

Assembly

  1. 3D print the main frame.

  2. 3D print the upper lid.

  3. 3D print the large mesh pre-filter.

  4. Install four 10 × 2 mm neodymium magnets into the main frame.

  5. Install four matching magnets into the upper lid, making sure their polarity allows the lid to attach correctly.

  6. Install the cylindrical HEPA filter into the frame.

  7. Install the optional activated-carbon filter if desired.

  8. add the insertion nut m3 6mm length on upper lid for fan support

  9. Mount the 220 mm fan to the upper lid.

  10. Route the fan power cable through the dedicated opening in the lid.

  11. Attach the upper lid to the frame using the magnetic connection.

Important Notes

The project does not include the HEPA filter or fan. These components must be purchased separately.

Before purchasing the filter, verify that the dimensions match the design. The intended filter size is approximately 200 mm in diameter × 300 mm in height.

The actual air-cleaning performance will depend on the HEPA filter specification, fan airflow, fan static pressure, sealing of the housing, and the quality of the overall assembly.

For best performance, make sure the filter is properly seated and that air cannot bypass the filter around its edges.

The mesh pre-filter should be cleaned periodically to prevent excessive airflow restriction. The HEPA filter should be replaced according to its condition and the manufacturer's recommendations.

Design Philosophy

The goal of this project is to demonstrate that an effective home air-filtration system does not need to be complicated. By combining a simple 3D-printed housing with an off-the-shelf HEPA filter and fan, the design provides a practical and accessible solution that makers can build, modify, and adapt to their own requirements.

Tagi