1 / 3
Pouzdro pro kulatý waveshare 2.8" displej s ESP32-S3 / Stand for round waveshare 2.8" display with ESP32-S3 — zdjęcie 1
1 / 3

Pouzdro pro kulatý waveshare 2.8" displej s ESP32-S3 / Stand for round waveshare 2.8" display with ESP32-S3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stojan pro Waveshare ESP32-S3-Touch-LCD-2.8C / Stand for Waveshare ESP32-S3-Touch-LCD-2.8C

Ocena
5 / 5
Polubienia
5
Pobrania
72
Wydruki
1
Wyświetlenia
249
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Pouzdro (stojan) pro kulatý Waveshare 2.8" displej s ESP32-S3

Tento model nám poslal Radek B. - mnohokrát mu děkujeme za tento model. 

Najdete tady tři verze pouzdra pro kulatý displej Waveshare 2.8" s ESP32-S3. Všechny mají  otvory pro USB-C kabel pro oba USB-C konektory a liší se jen mezerou pro displej.

Stojan byl vytvořen pro projekt MeteoPlaneRadaru (meteoradar + letadla) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, použít jej samozřejmě můžete jak chcete.

Enclosure (stand) for the round Waveshare 2.8" display with ESP32-S3

This model was provided by Radek B. — many thanks to him for sharing it.

Here you will find three versions of an enclosure for the round Waveshare 2.8" display with ESP32-S3. All versions have openings for a USB-C cable for both USB-C connectors; they differ only in the clearance around the display.

The stand was created for the MeteoPlaneRadar project (weather radar + aircraft) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, but you can of course use it however you like.

Tagi