Pouzdro pro kulatý waveshare 2.8" displej s ESP32-S3 / Stand for round waveshare 2.8" display with ESP32-S3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stojan pro Waveshare ESP32-S3-Touch-LCD-2.8C / Stand for Waveshare ESP32-S3-Touch-LCD-2.8C
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 1
- Views
- 249
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pouzdro (stojan) pro kulatý Waveshare 2.8" displej s ESP32-S3
Tento model nám poslal Radek B. - mnohokrát mu děkujeme za tento model.
Najdete tady tři verze pouzdra pro kulatý displej Waveshare 2.8" s ESP32-S3. Všechny mají otvory pro USB-C kabel pro oba USB-C konektory a liší se jen mezerou pro displej.
Stojan byl vytvořen pro projekt MeteoPlaneRadaru (meteoradar + letadla) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, použít jej samozřejmě můžete jak chcete.
Enclosure (stand) for the round Waveshare 2.8" display with ESP32-S3
This model was provided by Radek B. — many thanks to him for sharing it.
Here you will find three versions of an enclosure for the round Waveshare 2.8" display with ESP32-S3. All versions have openings for a USB-C cable for both USB-C connectors; they differ only in the clearance around the display.
The stand was created for the MeteoPlaneRadar project (weather radar + aircraft) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, but you can of course use it however you like.