1 / 3
120mm fan mount remix for Core One+ exhaust duct — zdjęcie 1
1 / 3

120mm fan mount remix for Core One+ exhaust duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to add a standard 120mm PC fan between a 100mm air hose and the linked exhaust for the Core One (non L) family

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to support the airflow through the hose I mounted to the model I remixed to make this. The original model is the gread exhaust duct by @Gerrie_1898427. So I added this mouning flange. You can either add my adapter to your already printed part, if you used gluable materials. Or you print the remix version. Like in the original, make sure the area that needs supporting doesn't spring holes from the thin wall!

The adapter that glues on is drawn for M4 screws going through. If you want to use heat set inserts, widen the mounting holes to your insert's spec. The ones I use have 5.6mm specced for example. Either in slicer/Blender or with a drill (latter is less optimal). The new part is adapted to use the inserts without mods, but you can of course just use through bolts too.

The fan I use is the standard 25mm thickness, with washers on both ends between bolt head/nut and the printed parts. The bolts are M4x50. If you use the heat set inserts, you will need only M4x40 with my setup. The model is 14mm of material. So add 15mm to your fan's thickness to find your bolt length. Through bolts need about 20-25mm extra instead of 15mm to the fans thickness.

I recommend using PETG or stronger to support the weight. Heat should not be an issue when using it from a printer. But its a lot of weight for a thin walled part.

To power the fan I us a generic 12V power brick that I added a pin header to. The printer is loud enough so the PC fan running at full rpm is not adding to the noise anyways. No need for rpm control. But it can make for a fun project, controlling the rpm with a buckboard, maybe even getting rpm readouts and the like.

If you want the version to add to the middle of an air hose without the remixed duct part, you can find it

Tagi