Makita LS1018L Drop saw CAMLOCK vacuum dust adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friction fit sleeve to convert outport to Peter H CAMLOCK system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This fits snug as a friction fit over the plastic output. An alternative would be to remove the plastic out port however I wanted the option of not using it should the need arise.

I measured the bore with test fit rings and had a chamfer added to further make insertion easier. Note my saw is a bit old so the exact dimensions of the bore may be different, measure before you print :)
This is intended to be used with Peter H Cam Lock system, which is why i have marked it as a remix so you can get the female side.
This was generated with Claude.
I Printed.
PETG
3 layer walls
15% Gyroid infill
5 layers top & bottom.