Makita LS1018L Drop saw CAMLOCK vacuum dust adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Friction fit sleeve to convert outport to Peter H CAMLOCK system.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This fits snug as a friction fit over the plastic output. An alternative would be to remove the plastic out port however I wanted the option of not using it should the need arise.

I measured the bore with test fit rings and had a chamfer added to further make insertion easier. Note my saw is a bit old so the exact dimensions of the bore may be different, measure before you print :)
This is intended to be used with Peter H Cam Lock system, which is why i have marked it as a remix so you can get the female side.
This was generated with Claude.
I Printed.
PETG
3 layer walls
15% Gyroid infill
5 layers top & bottom.