1 / 5
Apple Thunderbolt display VESA adaptor 100x100mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For 2011-2016 model A1407 apple thunderbolt display. Need 4x M4 hex screw, 4x M3x25 with nut.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Careful when tilting monitor - due to imbalance in center of mass and monitor weight, too much tilt can make the monitor fall on its side !!!
Also careful when fully extending VESA arm - make sure it can hold monitor weight !!!
For 2011-2016 model A1407 apple thunderbolt display.
Need 4x M4x16 hex head screw, 4x M3x25 imbus head with nut.
Print with strong filament like ABS-CF / ABS-GF / PETG-CF / PC...
Print wide side down (text up like in pictures).
Fusion 360 file included if you wish to edit for your kind of metal parts.
Note: cables dont go through a hole in the stand anymoer -> you can edit the diameter so they fit but it works even when they go around