Power Meter / Watt meter box for e-bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for a power/watt meter. I purchased mine locally from Jaycar in Australia - Powertech 6.5-100V 100A DC Power…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Housing for a power/watt meter.
I purchased mine locally from Jaycar in Australia - Powertech 6.5-100V 100A DC Power Meter (QP-2321).
Designed to fit an e-bike that I'm making which has 25 mm diameter handlebars at the neck.
I can easily upload more versions for different handle bar sizes on request.
The 2 clamps are fastened with 4mm x 25mm screws with 4 x 4mm (7mm hex) nuts held captive.
There's a built-in cable channel to route the wires out the back.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
45%
Filament: Cocoon Create PLA Black
Category: Sport & Outdoors