Liczymy pasujące modele…
Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm,…
Designed for Prusa MK3S but should work for anything with similar size Print in PETG Grill body infill doesn't matter Handle infill 20% Custom supports included in the model files (Prusa slicer)
Updated feet to print in black Added a hand touched up version to clean up color bleed. Remixed from @JDubya_221134 https://www.printables.com/model/328966-electricity-will-kill-you-sign
Eine 3D-gedruckte Fliegenklatsche, die vollständig aus PLA (Polylactid) hergestellt wird, ist ein praktisches und umweltfreundliches Werkzeug zur Bekämpfung von Insekten. Sie wird mithilfe eines 3D-Druckers produziert und bietet die…
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength.…
The fly swatter is 200mm long, 70mm wide, and 3mm thick.
This is a water resistant outdoor enclosure designed around a 3 watt solar panel. It was designed with Meshtastic in mind but it can be used for any solar project. --- Buy it fully assembled and ready to extend your mesh network :…
Say goodbye to pesky flies with the 'You Better Fly' swatter - the only thing that bugs bugs! With its sleek design and clever name, this swatter will have those flies shaking in their tiny little boots. And don't worry, I won't judge you…
This is a box for cotton swabs. At least the ones that can be purchased in most parts of the EU and Germany. It fits cotton swabs up to 8.6 cm in length. The cotton swabs I tested were 7.6 cm long (German once). It has a screw cap and is…
UPDATE: I created a new Meshtastic solar repeater node. There's nothing wrong or bad about this 6W version, it works great. However, I consider the new version to be the ideal Meshtastic solar base station when balancing uptime with size,…
A figure of Wattson from Apex Legends in a Thunder Kitty skin. Ripped form game files. This model is provided as is. Print at your own risk.
Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…
Simple designed fly swatter, printed in under 50 minutes. very flexible because only one millimeter thick Minimum print bed size of 250x250mm. The fly swatter must be rotated by 45 degrees in order to fit on the print bed. Recommended…
A large-format 3D printable fly swatter designed for bigger print beds. It combines an oversized perforated head, long handle, lightweight construction, and a hanging hole for convenient storage. Full Description Need a bigger fly…
Designed to replace the tip of the Nerf dart. Also comes in spider web design Cut around the dart tip with a razor or utility knife and twist it out to get the foam tube. You can put some glue to make it hold better, but it will work fine…
flyswatter | Fliegenklatsche | Falaklatsche | XXXL Griff (PLA): 20% Infill and 4 Outlines Klatsche (TPU): 10% Infill and 3 Outlines
Flies driving you absolutely insane this summer? Don't lose a wing over it ! Print the FLYORAMA 5000 for you and everyone else in your household. Let the battling of the flies begin, and enjoy peace and serenity of a fly free home. You'll…
I really liked 3D_Den design . Remixed the grip to remove the german(?) word. Printing Handle: PLA/PETG, 20% Infill and 4 perimeters Swatter: TPU, 10% Infill and 3 perimeters Credits flyswatter | Fliegenklatsche | Falaklatsche | XXXL by…
Simple fly swatter that you can print in 30 minutes. Printed with ASA for increased durability and flexibility. Should work fine with PLA and PETG as well.
These are basic mounting plates, a 5x5 plate is provided for the ubiquitous enclosures with a 5mm by 5mm grid, the plate can be mount to these plates with M3 screws. “KBOX Labs carlon v6 plate” is provided for use with the KBOX Labs…
Motivation Do you hate flies as much as I do, but struggle to kill them with a fly swatter. Well let me introduce to you this rubber band gun designed to snipe flies in their little heads. Simply load a rubber band, point the wand at a…
Added some extra material to the connection to make the swatter stronger.
Diese witzige Aufbewahrungsbox ist für Wattestäbchen gedacht. diese kann man gleich vorne herausnehmen und muss nicht den Deckel abnehmen. viel spaß beim Drucken ;) This fun storage box is intended for cotton swabs. These can be removed…
Spenderbox für Wattestäbchen
An expansion to the first wattle fence, found here: https://www.thingiverse.com/thing:2283338 https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on…
I needed to mount a small solar panel on top of my shed, Due to having a rubber roof I didn't want to drill through it so I decided my best option would be to glue it to the roof. I couldn't find a mount small enough for my panel so I…
damit die Wattestäbchen nicht von alleine rausfallen andere Stop-lippe Version
Ready to print on any 200x200mm bed. Prusa i3 default 0.2mm draft settings <90 min print
This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
Junction Box with cover for 2 Core cable (Sheath Thickness 3 mm, strand 0,75 mm) and watterproof cable termination (hole/diameter 4 mm). For Watterproof I used silicone glue (excatly Mamut glue) into Junction Box. Male Female Plug 2 Pin…
Designed for windspeeds from 5 to 25 [m/s] Windspeed [m/s] 5 11.67 18.33 25 Pitch [deg] 0 -8.0 6.17 18.31 Thrust [N] -0.75e6 -0.17e7 -0.94e6 -0.75e6 P Shaft [W] 1.55e6 15.72e6 15.71e6 15.71e6 P Elect [W] 1.53e6 15.01e6 15e6 15e6 RPM 5.017…
This is a fly swatter replacement part that can be attached to a telescopic handle. If it does not fit into your handle, use the attached .f3d and .step files to modify the model. The model does not contain the holes, here's how you can…
I printed at high quality with no issues.
A fly swatter made from TPU and PETG. Originally made by @pasq. Each model has been processed in Blender to clean up the geometry and exported as STL files, rather than 3MF, allowing for easier slicing. You now also have the option to…
Set up- Take your normal Elite nerf dart cut the tip of the dart off with scissors then put your new tip on the nerf dart. Shooting- when shooting use a nerf gun that the dart can reach the bottom with the tip still on the gun for example…
Printed in PLA+ and originally made for a 300mm x 300mm bed. Scale down the X and Y to fit your printer.
Modificación del modelo de @kuldar para que sea mucho más compacto y fácil de usar. Recomiendo usar pegamento fuerte para unir el cuerpo con la cabeza, y cuando lo lleves de ruta meter un mosquetón o una cuerda por los agujeros de la…
Medieval peasant wattle and daub house, from Western or Central Europe. Rather simple model, with removable roof and “interior" which is basically just door and dirt floor (so no window shutters. I made it in TinkerCad after all. Also,…
Fly Swatter V2 - improved 2023 design to suit multiple materials Hexagon Design Custom Infill Option PETG and FLEX Print Files Other Material: 8mm Rod (Carbon or Alu) Printing Tips: Printed with 0,4 Nozzle and 0,2mm Layer height Prints…
Update September 2nd, 2024 Added taller enclosure: “Enclosure-4x-LTO-v1.3”. It's 65mm tall and only includes mounting holes for the BattRAK x4 LTO. Added BattRAK x4 LTO. It holds 4 HTC2265 cells. These files are a duplicate of the files…
Kleine Box für Wattestäbchen, zum Aufschieben
The 3D-printed model of a fly swatter with a hooking system for the Cooler Master QUBE500 system is a clever solution for insect control and storage. This model features the following: Design and Dimensions: The fly swatter is 29.5 cm…
Recommend use PLA+(i use esun pla+), up to 6 walls, 30% infill. When connecting the two parts, i use superglue. If you want other material… you need adjust z-axis scale.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Seems to fit for most models that look like a tennis racket.…
fly swatter in different sizes →MK4 →XL
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic All you need is a 4mm diameter rod. Filament: TPU Infill: 100% Happy hunting :-)
Hose connector made for Towerplast watter tank. Could be also used for bottom holes of this tank - the thread is the same. Designed for 1" hose and 3/4" hole. Hadicový konektor / průchodka pro Towerplast nádrž na dešťovou vodu. Šroubení…
Fits on 2 sheets of an A1 Mini. You can also use a 3/8" wooden dowel as the stick. The swatter fits a rod that is 9.7mm in diameter. The mesh part of the swatter is designed to be printed in straight lines. Use .2mm layer height so that…
Praktischer Spender Für Wattestäbchen / Q-Tipps
I designed my own version of an air assist nozzle for this laser engraver/cutter. The air pump that I’ve got was a bit of a trade off between power and noise. Therefore I designed the nozzle to minimise air leakage and get the most out of…
Hexagon shaped fly swatter. comes assembled or disassembled. Credit to "3DPrintNovesia" for the fly model in the thumbnail.
printed on a 300 square build plate of cr10s printer.
I couldn't find a fly swatter online to buy... so I created my own, all you need is a 12mm dowel rod.
"Swoosh" fly swatter Designed for a good balanced hit. Fits perfectly with a d6mm (d1/4") dowel. Update: Adjusted tolerances for PETG. Added a .step file for customizing ;)
after some experience this is best printed in a 95A shore hardness tpu but you could probably get away with petg just fine. pla works unless you whack something too hard and then it may break. the pictures you see are sainsmart tpu…
This is a mounting plate for a RAK Wismesh 1W kit for a 5x5 mm grid enclosure. Use the included M2.5 Mounting screws for your WisMesh, or longer M2.5's if you prefer a more secure fit.
update : PETG only worked for a while till it broke in the webbing part, have just reprinted in TPU95 and is a lot stronger though it flops around a bit. I used painted on supports as shown in the attached pics. (Yes, it is a little more…
ein Behältnis für Abschminkpads und Wattestäbchen
This is a fan shroud for a Growatt 2000 TL-X inverter. It may fit other inverters as well. It is 230mm wide and 40mm long at the the part which faces the inverter. It is designed for a 140mm fan. It brought the temperatures of my inverter…
A dry brush texture palette that fits into the cover for a Masterson's Sta-Wet Handy Palette. 165mm Square, 3mm deep. This will fit on a Prusa Mini bed. This is my second version, you will need cork board to cover the flat 82.5mm x 165mm…
Ajout d'un gratte dos sur une tapette a mouche ... J'ai pris la main de ce gratte dos => https://www.thingiverse.com/thing:4711596 Pour l'ajouter a une tapette a mouche que je ne retrouve plus ... Elle est en 2 parties La tête, est…
Eine einfache lösung um bis zu 5 Krawatten oder Gürtel aufzuhängen
Added small notches, followed OPs instructions and now I can print and use without breaking!
Habe hier eine aktive Kühlung für einen Wechselrichter von Growatt konstruiert. Da ich festgestellt habe das der Wechselrichter im Sommer gerne zu warm wird und dann drosselt. Ohne die Kühlung kam der Wechselrichter auf die 60 Grad, mit…
Print the swatter with TPU, possibly also the clamp. The stem should be printed with "stiff" material Glue all together, use hotglue . Drucke die Klatsche mit TPU, ggf. auch die Klammer. Der Stiel sollte mit „steifem“ Material gedruckt…
Auf der Suche nach einem Wattepadhalter mit Zubehör stolperte ich über das Design von Sergej. Ich haber das Model zwar in Fusion selbst neu erstellt, jedoch ist die Idee und das Design von Sergej übernommen. Ich habe eime längere Version…
Made as a portable case for the RAK Wisblock 1 Watt starter kit. This case will accommodate a Very large battery 10000mah or 15000mah (60mm x 110mm x 10mm). This design incorporates a standard 128x64 OLED screen, standard micro toggle for…
Funny fly swatter, not very useful as a flyswatter more as a conversation piece. Category: 2D Art
I liked @pasq's flyswatter model but wanted the head to be a bit wider because my aim sucks. This is a direct replacement for the swatter_TPU file.
Falcon2 Pro Collection This is a set of half fan intake shrouds to help the laser unit not pick up particles from the surface being worked on to minimize build up in the cooling unit. Creality does provide instructions on how to pull the…
Very useful, always out of reach. We have two of those electric flyswatters, which incapacitates small insects with a satisfying “Bzzzt”. However, they're always in the way and never in reach when you actually need them. With this…
I have made this taller version of the cupholder to put my water bottle in it.
Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby
Lenovo ThinkCentre 90W Power Supply Wall Mount with Ventilation A wall-mountable holder designed specifically for Lenovo ThinkCentre 90-watt power supplies. This mount securely organizes your power brick while providing optimal…
This battery is pretty nice, screwed casement, bluetooth, new EVE 320WH cells (x4). Low and high temp protection works. Needed something for my DIY Starlink + 5G battery box thing. Feels insane to know I have 1,200Wh in this Apache 3800…
Designed the swatter for a chop stick to be the handle. Hole size for handle: 53mm x 63mm V2 is designed for regular pencils as the handle. Hole diameter for pencils: 7.3mm Feel free to contact me if you need any specific dimensions for…
My design of Wattson's fence post! The details are not 100% game-accurate, but I did my best. If you enjoy the model, please leave a like! (for the prusameters ;) ) No supports needed if kept at a smallish scale.
An air assist nozzle that can slide onto the 10W Snapmaker Laser Module . Designed to fit 5mm vinyl tubing and connector fitting. The model as uploaded suits a connector fitting with an outside diameter of 5.5mm and a length of 18mm. Feel…
FLY SWATTER I Printed in TPU, semi-flexible material Prints Flat on Print Bed - no supports necessary. End cap included with hand strap hole Infill Settings defined to create honeycomb structure Slicer file included for Remixes Other…
Fly swatter handle for Fly Swatter V2 (2023) by Chrise_2000@ChrisE . Dimensions are 8mm x 300mm printed diagonally. No support needed! Best to print in PETG for elasticity. Enjoy!
I printed a Fly Swatter Gun Card out of PETG, the spring came out strong, but the grid on the arrow cracked after the second shot. So I printed a TPU grid to repair the arrow. To repair it, you need to cut off the rest of the grid with…
The original author didn't care about printability, this remix fixes some model issues.
⌨ English ⌨ Title: "The Pro Fly Swatter: For Champions of Fly Hunting!" Step into the arena of fly hunting with the Competition Fly Swatter! Designed for the nimblest and the quickest, this formidable weapon is the ultimate tool for…
An update has been made. One dimension has been corrected and a variant with left-hand control has been created. For right-hand control, parts A-B-C-D are printed. For left-hand control, parts E-B-C-F are printed. For more information,…
This is a compact DC power supply that is powered with AC power. Wanted a lower power and adjustable compact supply to use on my desktop with spring terminals to quickly use with bare wire. No more searching for wall warts of the right…
Fly Swatter – Minimalist and Practical Design Say goodbye to annoying flies! This modern and practical fly swatter combines a clean and simple look with functionality. The head and handle are designed to screw together securely using a…
Keep your bathroom organized with this Q-tip dispenser. Designed for vertical storage, this box lets you simply grab a new swap each time. Refill from the top and let the swabs roll down to be dispensed. Looks neat and does the job. For…
This is V2 of the stand I made for the SI 4732. Now with customizable name plate! Video can be found here!
Dose für Wattestäbchen / Q-Tips, Durchmesser 50 mm. Durch die Viertelteilung fallen die Wattestäbchen nicht um oder stehen schief so daß sich der Deckel nicht mehr so leicht aufzusetzen ist, auch wenn nur mehr wenige in der Dose sind.…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
simple but effective fly swatter- Paddle obviously needs to be printed from a a flexible filament (TPU, TPEE) I also printed mine with no top or bottom and 4 shells so it's all infill only with perimeters! Handle is 2 parts, and fairly…
This is a cotton pad dispenser for square pads, which can normally be found in any German market. The pads are the standard size of 9cm x 11cm
Schraub oder Klebemontage möglich.
Just cut a hole in the cap and glue it.
This is a remix of jag's "Parametric Flyswatter" ( https://www.thingiverse.com/thing:9927 ). I just fixed the bug that the corners were not rounded properly when creating rectangular fly swatters instead of quadratic ones. Also fixed a…
The cotton swab dispenser provided here is an improved version of an initial design that only had a top lid. Refilling it with cotton swabs was therefore quite challenging. For this reason, I developed an improved version with a removable…
Tie rack and belt holder for coat hangers. Krawattenhalter und Gürtelhalter für Kleiderbügel.
Case for Watterot BME 280 Breakout Board https://shop.watterott.com/BME280-Breakout-humidity-pressure-temperature-sensor
