1 / 6
Comgrow Comgo Z1 10 Watt laser air assist — zdjęcie 1
1 / 6

Comgrow Comgo Z1 10 Watt laser air assist

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air assist nozzle for Comgrow Comgo Z1 with 10 Watt laser module

Ocena
5 / 5
Polubienia
9
Pobrania
159
Wydruki
0
Wyświetlenia
807
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed my own version of an air assist nozzle for this laser engraver/cutter.

The air pump that I’ve got was a bit of a trade off between power and noise. Therefore I designed the nozzle to minimise air leakage and get the most out of it.
To do so, I decided to create a separate air channel pointing directly at the focus point of the laser, instead of injecting air in the chamber with the risk of losing too much pressure on the cutting/engraving line. The amount of air from the cooling fan through the nozzle seems enough to keep smoke away from the lens clean.
The last picture shows a cut in 3 mm plywood (180mm/min, 100%) one without and one with air-assist.

Print settings

Use supports where necessary and don’t forget to use 100% infill otherwise it will definitely leak air everywhere.

Tagi