Comgrow Comgo Z1 10 Watt laser air assist
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air assist nozzle for Comgrow Comgo Z1 with 10 Watt laser module
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 159
- Makes
- 0
- Views
- 807
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed my own version of an air assist nozzle for this laser engraver/cutter.
The air pump that I’ve got was a bit of a trade off between power and noise. Therefore I designed the nozzle to minimise air leakage and get the most out of it.
To do so, I decided to create a separate air channel pointing directly at the focus point of the laser, instead of injecting air in the chamber with the risk of losing too much pressure on the cutting/engraving line. The amount of air from the cooling fan through the nozzle seems enough to keep smoke away from the lens clean.
The last picture shows a cut in 3 mm plywood (180mm/min, 100%) one without and one with air-assist.
Print settings
Use supports where necessary and don’t forget to use 100% infill otherwise it will definitely leak air everywhere.