OpenGrid / Underware / OpenConnect Notebook holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A notebook holder for underware, getting one more thing off the desk
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
A notebook holder, designed to print on smaller printbeds (I used the Flashforge Adventurer 5M, a 220mm^3 printbed). Holds notebooks up to 8.5" high (designed for A5, but there's a bit of extra space for the 8.5" sizes
PLA or PETG is fine for printing, 2 wall loops, 0.2mm layer height.
Solid wall and Hex Wall variants both provided. I recommend hex as it uses about half the filament as solid.
Freecad files provided.
I designed this to use the openConnect system for mounting, and I personally recommend the folded snaps (openconnect_Symmetric_Standard_snap_folded) on a full size openGrid for mounting to underware.
The folded snaps have their layer lines perpendicular to the shear force, so it could hold much more weight/take an accidental knee bump better.