Mailbox delivery instruction signs w/ embedded magnets - parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mailbox delivery instruction signs. Stick on with embedded magnets. Useful for locations with multiple addresses.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric delivery sign to provide additional instructions to the delivery service. The sign is designed for the cylindrical magnets to be embedded inside so that 1. the magnets don't rust and stain the mailbox 2. it's cool.
Customize it by opening either fcstd file in FreeCAD.
Set the text in the FreeCAD project. Each text section can be modified in the "Extrude XXX" -> ShapeString part's String property.
Reposition the text by selecting the corresponding named "positioned XXX", click CTRL+T, and translate it along the X and Y directions.
The base of the sign is 4mm thick and the outer ridge is 1mm thick.
The base in delivery-sign.fcstd takes 10mm x 2mm circular magnets. The base in delivery-sign2.fcstd takes 10mm x 1.5mm circular magnets. You can adjust the embedded magnet thickness by changing the "base" -> "Pocket"'s length property.
Select the "base", "positioned XXX", "horizontal line", "arrow", "outer ring" parts by holding CTRL and then Export (CTRL+E) at 3MF.
Import 3MF and assign colors in the slicer
Add pause on the layer where the magnet holes start to get filled up at the top.
Print and insert the magnets when pause happens.