BARClamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use as bar clamps or end stop otherwise as you wanna to be. Search for Bar Clamps or Jaw Stop on Google.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Bar Clamps are normally for compressing glued joinery similar to clamping stations, so two or more when assembled if long enough for workpiece otherwise attached if you have sawhorse. Other uses for this can be end stops to stabilize workpiece (yes for sawhorse) instead of bar clamps or both (yes use as vice), so print as many as you want. Scale up or down for your workbench size or sawhorse.
Sorry still no instructions whereas it is DIY.
Parts needed first before bar clamp assembly:
Two sides left and right
Lead screw
Optional Rubber sleeves for left and right grips for non-slip when grinding or sanding
Plastic safe nails (X4) for end stop otherwise heat sink with screws attached aligned
Drill set for bores lead screws otherwise you edit drawing for bore size usually center either side
Thanks.