P
PrintablesEzly3D
2x4 Wood Sawhorse Brackets
Needed a saw horse Plan to print in PETG 60 Infill, Triangles, .8 Extrusion width with a .4 nozzle will update with results
- Pobrania
- 223
- Polubienia
- 43
- Ocena
- 5
Wyniki wyszukiwania: sawhorse
Liczymy pasujące modele…
P
PrintablesJohnMartin
Sawhorse Hanger for TOUGHBUILT C700
This is specifically for the TOUGHBUILT C700 sawhorses but may work with other, similar models. This is a very small print but really strong. Just don't use PLA. I used ASA. There is a “no logo” version included if you don't want or can't…
- Pobrania
- 178
- Polubienia
- 42
- Ocena
- 3,67
P
PrintablesAShop.sk
Sawhorse Hanger for TOUGHBUILT C550, C600, C650, C700
This is specifically for the TOUGHBUILT C550, C600, C650, C700 sawhorses. Držiak pre stavebné kozy TOUGHBUILT C550, C600, C650, C700. TOUGHBUILT C550 TOUGHBUILT C600 TOUGHBUILT C650 TOUGHBUILT C700
- Pobrania
- 153
- Polubienia
- 25
- Ocena
- 5
P
PrintablesC4 Designs
SCX10 SawHorse Stand
PLA for indoor use. 2 or 3 walls depending on nozzle diameter, 20% to 24% your favorite infill. No Supports Required (4ea Required) Saw Horse Stand Vertical Piece (2ea Required) Saw Horse Stand Horizontal Piece (8ea Required) 3mm x 10mm…
- Pobrania
- 145
- Polubienia
- 24
- Ocena
- 0
P
Printablesredmem
A-Frame Bracket for 2x4 "Sawhorse"
This is was originally designed to make a target stand utilizing standard 2x4's. My goal was to copy this design found in my hardware store:…
- Pobrania
- 141
- Polubienia
- 37
- Ocena
- 0
P
PrintablesCanardiain
Sawhorse Foot
I built some simple sawhorses with 2x4's but realized I hadn't cut the feet at angles parallel to the ground. I 3D printed these simple feet which press onto the 2x4's and are held in place with a screw. Print them in 100% infill in PETG…
- Pobrania
- 102
- Polubienia
- 22
- Ocena
- 5
P
Printablesgeorgag
DeWALT Sawhorse Wall Brackets
These is a wall bracket for DeWALT a sawhorse. The bracket includes two holes for screws. These are designed to print without supports. Compatible Sawhorse:…
- Pobrania
- 99
- Polubienia
- 33
- Ocena
- 5
P
PrintablesJob San Biju
Perkins Sawhorse Leg Cutoff Marking Jig
The jig for marking the cutoffs for Jamie Perkin's Perfect sawhorse design Wanting to make the perfect sawhorses for your shop or for your woodworking hobby setup or your Jobsite? Well, the Perkins Builder Brothers have come up with a…
- Pobrania
- 73
- Polubienia
- 14
- Ocena
- 0
P
PrintablesEugene L
Protective foot covers for a ToughBuilt C300 sawhorse
Protective foot covers for a ToughBuilt C300 foldable sawhorse. Sutable to use both on ground (less drowning) and on clean floors (no damage to the floors). Designed to allow folding legs without removing covers. Material: PET-G Infill:…
- Pobrania
- 70
- Polubienia
- 7
- Ocena
- 5
P
PrintablesJEO
Harbor Freight, Central Machinery Folding Sawhorse Bracket Replacement Repair
Tried making them with clip-ins like the original but the PLA was not flexible enough and kept braking. I went with the screw together and that works better and less likely to brake. Hardware used are (3) 5mm nuts, (2) 5mm x 30mm screws,…
- Pobrania
- 62
- Polubienia
- 15
- Ocena
- 5
P
PrintablesPenguin_holic
2x4 sawhorse_end cap
2x4 caps with a 15° slope for sawhorse legs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: eSUN PLA Black Category: DIY
- Pobrania
- 54
- Polubienia
- 11
- Ocena
- 0
P
PrintablesRiciR
Miniature Sawhorse
Classic carpenter's sawhorse, the type we all made in woodworking class or on the job. Tool tray near middle. There's two files - half the horse and a connecting piece. Print two halves and glue together using the "board" to connect and…
- Pobrania
- 33
- Polubienia
- 8
- Ocena
- 0
P
PrintablesEl llanero solitario
craftsman metal sawhorse painting accesory
Have you ever used those handy painting cones ( https://www.amazon.com/painting-cones/s?k=painting+cones ) to raise items from the floor? You wish you could buy those cones to use on top of your sawhorse? Make yourself some! I designed…
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 5
P
PrintablesDaveTheYellowDart
Trommel Sifter Sawhorse Roller Adapter
I built a trommel sifter for stuffing my compost around a pair of Task Force sawhorses and Home Depot buckets. I don't know if those sawhorses are still available, I've had them for years. Anyway the rollers are these 1 ½" casters . I…
- Pobrania
- 27
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRotaryFever
Replacment foot for Jorgensen Pony Sawhorse
Broke one of the plastic feet on my Pony sawhorse. Needed a quick fix. This one is an easy print that just slips on. Adjust scale for tighter fit. Made with PLA. https://ponyjorgensen.com/product/2-piece-clamping-sawhorses/
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
Printablesbluefin66
Handle for roller stand / trestle / sawhorse
For bolthead size, see image. For strength: In your slicer, add cylinder modifier through the centre with wall loops increased to 5 (see images).
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichael
V-Block Adapters for Work Trestles & Sawhorses (with TPU Pads)
Universal V-Block Adapters for Workshop Stands (with TPU Cushioned Pads) Upgrade your standard workshop stands or sawhorses ( 25x25 mm) with these heavy-duty V-Block (Prism) Adapters . Designed specifically for general workshop tasks…
- Pobrania
- 26
- Polubienia
- 11
- Ocena
- 0
P
PrintablesCargy
Outfeed Roller Top for ZAG Folding Sawhorse
Small update: Having used this for a while now, I made the following experience-based change: I would recommend splitting the roller into two or more pieces (with the relevant quantity of extra bearings and holders, obviously!). This…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChsbrgr
2x4 Lumber Brace for Sawhorse
I have a pair of plastic sawhorses that included these slide-on braces that allowed you to support a length of wood on a single sawhorse. A few went missing, and I couldn't find anything on the internet, either purchasable or printable,…
- Pobrania
- 20
- Polubienia
- 7
- Ocena
- 0
P
Printablestxo
Little legs or sawhorse
I needed to raise some little plants on my table to expose then better to the sun and so I can use the space below, so I made this little legs or sawhorses. The model is ready for a 92mm wide plank approx. You could modify it on the…
- Pobrania
- 20
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDrJones
painter's pyramid for sawhorse
I needed some painter's pyramids for painting a shelf board using sawhorses, so quickly made some. These are for paint horses with a relatively thin beam. To get is to fit to your beam thickness, use the slicer (see screenshot): Use the…
- Pobrania
- 18
- Polubienia
- 20
- Ocena
- 0
P
PrintablesLuke Sutton
.22 pellet Chernobyl sawhorse (freebie)
I design crazy pellets and typically sell the models - they are all tested and aerodynamic with different effects for pest control or target shooting. This is a new design and I'm out of filament so anyone willing to test this and or make…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesVirgil
Clip for folding workmate sawhorse
This was an impossible-to-find clip that held together a folding plastic saw horse in the collapsed position. I made several versions. Since the original clips broke I made a few optional ways to use it. A PETG version works but the clips…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYangorang
Worx WX065 Sawhorse Riser
A simple contraption I use to raise work pieces off of the Worx sawhorse for tasks like painting. Slides into the same channel that the clamps normally go into. I find this useful mainly for when I'm trying to paint 2' x 4' boards for…
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDennis Mckinney
Stanley Adjustable sawhorse bracket
I have a set of Stanley Adjustable sawhorses and needed a way to secure a simple frame made out of 2x3" lumber that will create a platform for me to cut plywood sheets on easily. These brackets simply snap onto the top of the sawhorse,…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRuseter
Stanley sawhorse 2x4 and pipe adapter.
This model is a part for the Stanley brand plastic extending sawhorse 2x4 and pipe adapters. They are used to attach a sacrificial 2x4 for sawing. Also, if you flip them they allow the sawhorse to hold pipes. Your original adapters might…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintableswilliamCromar
Sawhorse for flat-bottom boat
Flat-bottom boats use a short sawhorse for working and display. Our boat-builder needed a model ⅛ size for a model boat, so we printed him a variety to choose from. That variety is here! The models are full scale, and to get to ⅛ size, we…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGirak
Steelman Sawhorse Replacement Foot
Your sawhorse may be branded under a different name. The square tube steel legs are approximately 20.3 mm wide. Friction fit.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRandomlyJeff
IKEA MITTBACK Trestle Sawhorse Vibration Dampener
Vibration dampener for the IKEA MITTBACK Trestle. I have 2 3d printers in a wooden cabinet on a pair of the mittback trestles on the upper floor of the house. I noticed recently that the vibrations from the printers were being transferred…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesA.Y. designs
staining/painting huskey sawhorse exessory
an exesssory for huskey saw horses for when saining or painting large sheets of wood to avoid messing up drying coats print settings: filament: PLA infill: 30% walls: 4 base/top layers: 4 supports- yes other notes: file down the tips so…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
IKEA MITTBACK Trestle Sawhorse Vibration Dampener
Vibration dampener for the IKEA MITTBACK Trestle. I have 2 3d printers in a wooden cabinet on a pair of the mittback trestles on the upper floor of the house. I noticed recently that the vibrations from the printers were being transferred…
P
Printables
Sawhorse Hook
Needed a way to stow the sawhorses. Quick, initial version (the solid one) turned out to be useful for the ladder - no waste :) I like the evolved design of the second one better - but not sure which one takes the most load. Instructions…
P
Printables
SCX24 Sawhorse Style Vehicle Stands
PLA for indoor use. 2 or 3 walls depending on nozzle diameter, 20% to 24% your favorite infill. No Supports Required (4ea Required) Saw Horse Stand Vertical Piece (2ea Required) Saw Horse Stand Horizontal Piece (8ea Required) 3mm x 7, or…
P
Printables
Sawhorse Latch
I had a sawhorse with a broken latch, so it fell over if you looked at it wrong. I made a new latch and printed it. I feel like this is unlikely to be directly useful for someone else, but it's easily modifable. Category: Parts
P
Printables
Painting Accessory for Craftsman / Stanley Sawhorse (remix)
Standoff for painting, etc. that clips onto my Stanley sawhorse. Sawhorse is the same as a Craftsman model.