1 / 3
Protective foot covers for a ToughBuilt C300 sawhorse — zdjęcie 1
1 / 3

Protective foot covers for a ToughBuilt C300 sawhorse

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective foot covers for a ToughBuilt C300 foldable sawhorse.

Ocena
5 / 5
Polubienia
7
Pobrania
73
Wydruki
1
Wyświetlenia
601
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Protective foot covers for a ToughBuilt C300 foldable sawhorse.

Sutable to use both on ground (less drowning) and on clean floors (no damage to the floors).
Designed to allow folding legs without removing covers.

Material: PET-G

Infill: 15%

Dimensions:
Base Length =  44.85 mm
Base Width =  32.88 mm
Walls Thickness = outer 3 mm, inner 2 mm
Angle (legs) = 20º
Angle (right leg twist compensation) =  3.8º
Rivet hole diameter for rivets up to 4 mm.
(Rivets are optional).

R and L are oriented for closest to the end pair of legs while staying at the end of the sawhorse.

Rotate Part R to lay the bottom surface of the part to the printer's plate prior to print. No support needed.

Tagi