Luba 2 ESP32 Backpack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Luba 2 ESP32 Backpack for Mammotion Smart Mower, To be used with Home Assistant
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I'm using Home Assistant and the Mammotion add-on
USAGE- Using the add-on in home assistant i can manually move my mower remotely through my home network using wi-fi. When it gets stuck and im at work i can make a slight move and tell it to resume.
I implicated a smart system in home assistant to when they outdoor temps go above a set point that the mower will dock until the temp drops. i set the no work periods using the actual time of sunrise and sunset. ( i don't like seeing the robots headlight at night ) Much more can be applied.
Link to Mammotion Home Assistant Add-on
https://github.com/mikey0000/Mammotion-HA
here is the ESP32 guide for the integration
https://github.com/mikey0000/Mammotion-HA/wiki/ESP32-guide
They have a discord linked on the github if you have issues.
I recommend some Polymaker ASA
Purchase an XIAO SeeedStudio ESP32C6
I used a couple inches of spare wire to solder on a USB C Male end to the ESP (See Photos)
You can see i used a small piece of tape to hold the device in place and protect from accidental rubbing.
The esp32 is snug and some what snaps in but it could vibrate loose.
BOM:
ESP32C6 - $12
USB C Male - $7
ASA Filament (or ABS)
Amazon links directly support me by affiliation.
Buy me a beer Ko-Fi