Springy Couch Spacer – Wall Clearance for Reclining Headrests
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your couch away from the wall with a slim, springy spacer for reclining headrests.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this sofa spacer to create enough clearance from the wall so the headrests can be raised without rubbing against it.
I wanted something that would stay in place when the sofa is moved, and that wouldn't break if the load was applied unevenly.
To keep the spacer from moving, I added a recess that fits around part of the sofa's leg. The base is very thin, which helps it stay in position even when the sofa is moved.
To absorb impacts against the baseboard and avoid having the spacer resting rigidly against the wall, I went with a simple linear spring. When fully compressed, the spacer still maintains approximately 10 cm of clearance from the wall.
Compatibility: Tested on the Mondo Convenienza Nuvola sofa. Check the dimensions and leg shape before printing. Mine is placed at the end of a 47 mm x 41 mm L-shaped leg.
Credits: I used the linear spring from https://www.printables.com/model/269740-printed-springs
Files
The model consists of two parts that are used together:
L – left part, when looking at the sofa from the front
R – right part, when looking at the sofa from the front
Print settings
Material: PLA
Infill: 15% – Aligned Rectilinear
Walls: 2
Supports: None
PLA is sufficient for this application, although the spring may slowly deform over time due to being kept under compression.