1 / 2
Foil Drive HP Stator Motor Protective Cover — zdjęcie 1
1 / 2

Foil Drive HP Stator Motor Protective Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover your Foil Drive "High Power" motor to protect it after you've removed the rotor / blades.

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Cover your stator to protect it in transport after the rotor / blades have been removed. I made this because I was tired of getting the greasy lanolin spray (used to protect the motor from corrosion when not in use) on my clothes when I would move my board. 

Features include:

  • Fits the new larger HP motor

  • Slides on and snaps into place - doesn't easily fall off

  • (Optional) The ventilated model allows for your motor to continue to air dry

  • (Optional) The solid / non-ventilated model keeps out dust and sand (but holds moisture in)

Caution - if you chose the non-ventilated model, make very sure your motor is fully dried before covering it.  Trapping moisture inside will increase corrosion.

I recommend PETG. A stiff 95A TPU might also work.  

See my other related parts here: