Foil Drive HP Stator Motor Protective Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover your Foil Drive "High Power" motor to protect it after you've removed the rotor / blades.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cover your stator to protect it in transport after the rotor / blades have been removed. I made this because I was tired of getting the greasy lanolin spray (used to protect the motor from corrosion when not in use) on my clothes when I would move my board.
Features include:
Fits the new larger HP motor
Slides on and snaps into place - doesn't easily fall off
(Optional) The ventilated model allows for your motor to continue to air dry
(Optional) The solid / non-ventilated model keeps out dust and sand (but holds moisture in)
Caution - if you chose the non-ventilated model, make very sure your motor is fully dried before covering it. Trapping moisture inside will increase corrosion.
I recommend PETG. A stiff 95A TPU might also work.
See my other related parts here: