Victorinox corkscrew to Leatherman eyeglass screwdriver bit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified original for the double sided Leatherman eyeglass screwdriver bit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adjusted the original model to accept a Leatherman double sided eyeglass screwdriver bit. This gives me both a #000 Phillips bit and a 1.6mm flat tip bit in the same Victorinox corkscrew.
Printed this version from translucent black PC but I expect any material that doesn't creep much will work fine; my first version printed in PLA, lost my bit when it got hot in the car.
The fit is deliberately tight to prevent the bit from moving in its plastic carrier. I successfully installed/squeezed the bit into this plastic carrier using: a bench vise, a pair of large adjustable pliers, or using two pairs of normal pliers.
I chose to install the bit with only a small amount of Phillips bit sticking out so that I can use the flat side for more purposes.