Victorinox corkscrew to Leatherman eyeglass screwdriver bit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified original for the double sided Leatherman eyeglass screwdriver bit
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adjusted the original model to accept a Leatherman double sided eyeglass screwdriver bit. This gives me both a #000 Phillips bit and a 1.6mm flat tip bit in the same Victorinox corkscrew.
Printed this version from translucent black PC but I expect any material that doesn't creep much will work fine; my first version printed in PLA, lost my bit when it got hot in the car.
The fit is deliberately tight to prevent the bit from moving in its plastic carrier. I successfully installed/squeezed the bit into this plastic carrier using: a bench vise, a pair of large adjustable pliers, or using two pairs of normal pliers.
I chose to install the bit with only a small amount of Phillips bit sticking out so that I can use the flat side for more purposes.