Custom Pro Boat Recoil 17 20mm Jet Dive Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Rc Boat Jet Drive Mod to Improve Performance For The Pro Boat Recoil 17
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom 3d printed jet drive I designed for the Pro Boat Recoil 17, replacing the original open propeller setup.
The jet drive was designed from scratch in Fusion 360, inspired by the M-Jet 4-port concept, and designed around a 20mm drive.
This is still a work in progress prototype. The current version works, but there are still areas I want to improve and refine.
Full build and testing video:
Parts
Pro Boat Recoil 17 and included hardware/screws
85mm 4mm round shaft
52mm 4mm round shaft
2x 4x10x4 sealed bearings
3mm to 4mm couple
R-01, R-03 O'rings
3x M2.5 6mm
2x M2.5 16mm
4x M3 6mm
1x M3 10mm
Printing
Material: PLA/PETG/ASA.
Nozzle: 0.4 mm
Layer height: 0.2 mm
Walls: 4-5
5/4 Top/Bottom
Infill: 40%
Supports: Support Critical regions only
Notes
This design has not been fully refined yet, so don't expect to gain speed or real power. It may be worse! than the original open prop setup.
This project is intended for experimentation and modification. If you print it, I'd love to hear how it works for you or what you changed.
More updates and future revisions may be added as I continue developing it.