Case for Adafruit High Voltage UPDI Friend (ID 5893)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, tested enclosure for the Adafruit High Voltage UPDI Friend ID 5893
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compact 3D-printable enclosure designed specifically for the Adafruit High Voltage UPDI Friend, Product ID 5893. It consists of two parts — a body and a removable lid — and provides access to all required controls and connectors.
Features:
Designed for Adafruit High Voltage UPDI Friend ID 5893
Access to the USB-C connector
Access to the HV / UPDI side switch
Opening for the external cable connector
Fingernail notch for easy lid removal
Compact two-piece enclosure
No screws required
Approximate enclosure dimensions:
31.24 × 21.40 × 9.20 mm
The PCB used for fitting measures approximately:
28.0 mm long, excluding the USB-C connector
17.9 mm wide
Printing
Recommended starting settings:
0.4 mm nozzle
0.20 mm layer height
PLA or PETG
3 walls / perimeters
No supports required
Depending on your printer calibration and material shrinkage, a small amount of XY compensation may be required.
The model includes separate STL files for the body and lid.