1 / 1
Case for Adafruit High Voltage UPDI Friend (ID 5893) — image 1

Case for Adafruit High Voltage UPDI Friend (ID 5893)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact, tested enclosure for the Adafruit High Voltage UPDI Friend ID 5893

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Compact 3D-printable enclosure designed specifically for the Adafruit High Voltage UPDI Friend, Product ID 5893. It consists of two parts — a body and a removable lid — and provides access to all required controls and connectors.

Features:

  • Designed for Adafruit High Voltage UPDI Friend ID 5893

  • Access to the USB-C connector

  • Access to the HV / UPDI side switch

  • Opening for the external cable connector

  • Fingernail notch for easy lid removal

  • Compact two-piece enclosure

  • No screws required

Approximate enclosure dimensions:
31.24 × 21.40 × 9.20 mm

The PCB used for fitting measures approximately:

  • 28.0 mm long, excluding the USB-C connector

  • 17.9 mm wide

Printing

Recommended starting settings:

  • 0.4 mm nozzle

  • 0.20 mm layer height

  • PLA or PETG

  • 3 walls / perimeters

  • No supports required

Depending on your printer calibration and material shrinkage, a small amount of XY compensation may be required.

The model includes separate STL files for the body and lid.